John Deere

X585

Horsepower
25hp
Production
2002–2006
Category
lawn

Overview

Production

Original Price$11,499 (2002)
Engine25HP Kawasaki 745cc 2-cyl gasoline
Tractor Typegarden
SeriesHDGT X Series
Manufacture LocationHoricon, Wisconsin, USA

Mechanical

Drive Typefour-wheel drive
Steeringpower
Brakeswet disc
Differential Lockmechanical rear

Hydraulics

Hydraulic Valves2
Hydraulic Pressure1,000 psi (69 bar)

PTO & Hitch

Rear Hitch Type0 or 1-limited (optional)
Rear Lift450 lbs (204 kg)

Fuel Capacity

Fuel Capacity Rops6.5 gal (24.6 L)

Other

Variant X4852WD two-wheel steer
Variant X5854WD
Total Flow6.2 gpm (23.5 lpm)
Variant X585seupgraded seat, wheels, and brush guard
Variant X485awsall-wheel steer
Operator Stationopen operator station with optional hard or soft weather enclosures and optional heater
Transmission Typehydrostatic
Front Axle Capacity4.5 qts (4.3 L)

Engine

EngineKawasaki FD711D
Fuel Typegasoline
Cylinders2-cylinder
Coolingliquid-cooled
Displacement45.5 ci (745 cc)
Bore3.07 in (78 mm)
Bore Stroke3.07x3.07 in (78 x 78 mm)
Stroke3.07 in (78 mm)
Compression Ratio8
Power Gross25 hp (18.6 kW)
Torque2,000 RPM
Torque36.1 lb-ft (49 Nm)
Air Cleanerdual paper element
Fuel Systemfuel injected
Starter Volts12
Oil Capacity1.9 qts (1.8 L)
Coolant Capacity4.2 qts (4 L)
Idle1600-3550 RPM

The dealer sales manual identifies this engine as a FD671D-DFI. The Deere parts manual also lists a FD750D.

Dimensions

Length75 in (190 cm)
Width46.8 in (118 cm)
Height51.2 in (130 cm)
Wheelbase55.7 in (141 cm)
Weight955 lbs (433 kg)
Tires Ag Rear23x12.00-12
Tires Lawn Front18x8.5-10, 18x7-8
Tires Lawn Rear26x12-12, 26x10.5-12

Transmission

Transmission Typeshaft-driven hydrostatic
Transmission ModelTuff Torq K92
Gearsinfinite forward and reverse
Oil Capacity7 qts (6.6 L)
Oil TypeLow Viscosity HY-GARD (J20D)

Available Attachments

48" mid-mount mower deck54" mid-mount mower deck62" mid-mount mower deckSnowblowerBladeFront-end loader

The X585 was compatible with a 42-inch (M04390X/M04391X) hydraulic tiller on the three-point hitch. The models 450 and 647 tillers required the three-point hitch and rear PTO.