Loading...
Please wait while we retrieve your information.
If this page does not load within 30 seconds, pleaserefresh the page
Please wait while we retrieve your information.
If this page does not load within 30 seconds, pleaserefresh the page
Engine:
Farmall Standard
Power:
51 HP (Engine) / HP (PTO)
Fuel Type:
Diesel
Production:
1952 - 1954
| Overview | |
|---|---|
| Summary | x1952 - 1954 Row-Crop tractor |
| Production | |
|---|---|
| Manufacturer | Farmall (a part of International Harvester) |
| Summary | Row-Crop tractor |
| Factories | Rock Island, Illinois, USA |
| Louisville, Kentucky, USA | |
| Total built | 57,092 |
| 44,551 (Rock Island) | |
| 12,541 (Louisville) | |
| 245 (Super MV) | |
| Summary | Original price was $2,500 in 1954 / The basic Farmall/IH model is the Super M. The Super MD is diesel. The Super MTA has the torque amplifier and independent PTO, and was built only in 1954. |
| Mechanical | |
|---|---|
| Summary | Two-wheel drive / Manual steering / Differential mechanical dry disc brakes / Open operator station. |
| Hydraulics | |
|---|---|
| Type | IH Lift-All * Transmission driven pump on early model, live engine-driven pump on Stage II models |
| Belt Pulley | |
|---|---|
| Diameter | 11 inches 27 cm |
| Width | 7.5 inches 19 cm |
| RPM | 899 |
| Speed | 2588 ft/min 788.82 meters/min |
| Electrical | |
|---|---|
| Ground | positive |
| Charging system | generator |
| Battery volts | 6 |
| References | |
|---|---|
| Summary | / Farmall Letter Series Tractors by Lee Klancher / Operator's Manual Farmall Super M and Super MV (1004245R1) published in 1952 |
| Engine options | |
|---|---|
| Summary | International Harvester 4.3L 4-cyl gasoline / International Harvester 4.3L 4-cyl LP gas |
| Engine Detail | |
|---|---|
| Summary | International Harvester C264 / gasoline / 4-cylinder / liquid-cooled vertical I-head |
| Displacement | 264 ci 4.3 L |
| Bore/Stroke | 4.00x5.25 inches 102 x 133 mm |
| Fuel use | 3.657 gal/hour 13.8 l/hour |
| Air cleaner | oil bath |
| Compression | 5.9:1 |
| Rated RPM | 1450 |
| Idle RPM | 400-1600 |
| Firing order | 1-3-4-2 |
| Starter volts | 6 |
| Coolant capacity | 26 qts 24.6 L |
| Sparkplug gap | 0.023 inches 0.584 mm |
| Intake valve clearance | 0.017 inches (hot) 0.432 mm |
| Exhaust valve clearance | 0.017 inches (hot) 0.432 mm |
| Engine Oil | |
|---|---|
| Summary | |
| Oil capacity | 8 qts 7.6 L |
| Engine Detail | |
|---|---|
| Summary | International Harvester / LP gas / 4-cylinder / liquid-cooled vertical I-head |
| Displacement | 264 ci 4.3 L |
| Bore/Stroke | 4.00x5.25 inches 102 x 133 mm |
| Fuel use | 5.211 gal/hour 19.7 l/hour |
| Air cleaner | oil bath |
| Compression | 6.75:1 |
| Rated RPM | 1450 |
| Firing order | 1-3-4-2 |
| Starter volts | 6 |
| Transmission | |
|---|---|
| Type | sliding gear |
| Gears | 5 forward and 1 reverse |
| Clutch | 12-inch dry disc |
| Oil capacity | 52 qts 49.2 L |
| Farmall Super M Tires | |
|---|---|
| Ag front | 6.00-16 |
| Ag rear | 12-38 |
| Dimensions | |
|---|---|
| Wheelbase | 89.25 inches 226 cm |
| Length | 134.6 inches 341 cm |
| Width | 84.5 inches 214 cm |
| Height (steering wheel) | 79 inches 200 cm |
| Weight | 5603 lbs 2541 kg |
| Ground clearance | 15.5 inches (frame) 39 cm |
| Clearance (rear axle) | 26.25 inches 66 cm |
| Tractor Tests | |
|---|---|
| Summary | NTTL 475: gasoline 5-speed 2WD / NTTL 484: LP gas 5-speed 2WD |
| Nebraska Tractor Test 475 | |
|---|---|
| Summary | Gasoline 5-speed 2WD June 25 - July 2, 1952 Link: Nebraska Tractor Test 475 file |
| Belt power (max) | 46.26 hp 34.5 kW |
| Belt fuel use (max) | 3.9 gal/hour 14.8 l/hour |
| Summary | Drawbar performance |
| Max power | 41.79 hp 31.2 kW |
| Summary | Gear 3 used for power test. |
| Max pull | 5,676 lbs 2574 kg |
| Summary | Gear 1 used for pull test. |
| Nebraska Tractor Test 484 | |
|---|---|
| Summary | LP gas 5-speed 2WD October 1 - 10, 1952 Link: Nebraska Tractor Test 484 file |
| Belt power (max) | 47.07 hp 35.1 kW |
| Belt fuel use (max) | 5.5 gal/hour 20.8 l/hour |
| Summary | Drawbar performance |
| Max power | 44.23 hp 33.0 kW |
| Summary | Gear 3 used for power test. |
| Max pull | 6,115 lbs 2773 kg |
| Summary | Gear 1 used for pull test. |
Last Database Update: 12/7/2025