Ford
8830
Farm tractor · 1992–1997 · 180 hp
Ford8830
The Ford 8830 is a farm tractor manufactured from 1992 to 1997. It features a Ford engine, and power steering. The transmission is a 18-speed type with 18 forward and 9 reverse.
Engine
| Engine | Ford |
|---|---|
| Cylinders | 6 |
| Cooling | liquid-cooled |
| Turbocharger Status | intercooled turbocharged diesel |
| Displacement | 401 ci (6.6 L) |
| Bore | 4.4 in (112 mm) |
| Stroke | 4.4 in (112 mm) |
| Compression Ratio | 15.6 |
| Power PTO | 164.8 hp (122.9 kW) |
| Power Drawbar | 145.69 hp (108.6 kW) |
| Starter Volts | 12 |
| Oil Capacity | 19.6 qts (18.5 L) |
| Coolant Capacity | 22.8 qts (21.6 L) |
| Manufacturer | Ford |
| Rated | 2,200 RPM |
| Firing Order | 1-5-3-6-2-4 |
Transmission
| Transmission Type | 18-speed |
|---|---|
| Transmission Model | Funk Ultra Command |
| Gears | 18 forward and 9 reverse |
| Transmission Description | The Ford Ultra Command Powershift allows on-the-move shifting between gears, and shuttle shifting, without a clutch. A single lever controls the transmission; moving it to the left shifts down, to the right shifts up. Pushing forward increases forward throttle while pulling it back moves the tractor in reverse. An inching pedal is used for precise movements. |
| Oil Capacity | 101.6 qts (96.2 L) |
| Available Options | 18-speed, 16-speed |
Hydraulics
| Type | open center gear pump, dual pumps optional |
|---|---|
| Pump Flow | 20 gpm (75.7 lpm) |
| Pressure | 2,500 psi (172.4 bar) |
| Valves | 2 |
| Scv Flow | 16.9 gpm (64 lpm) |
Hitch
| Rear Type | 3/2 |
|---|---|
| Hitch Control | position and draft control |
Dimensions
| Length | 191 in (485 cm) |
|---|---|
| Width | 82 in (208 cm) |
| Height Cab | 113.8 in (289 cm) |
| Height Rops | 115 in (292 cm) |
| Wheelbase | 111 in (281 cm) |
| Ground Clearance | 16.4 in (41 cm) |
Weight
| Operating | 15,520 lbs (7,039 kg) |
|---|
Tires & Tracks
| Front Ag | 14.9/13-28 |
|---|---|
| Rear Ag | 18.4/15-38 |
Fuel
| Capacity | 75 gal (283.9 L) |
|---|
Steering
| Type | power |
|---|---|
| Pressure | 2,025 psi (139.6 bar) |
Cab
| Cab | optional with heat and air-conditioning |
|---|
Compatible Implements
| Model | Type | Width | Min HP |
|---|---|---|---|
| Land Pride DB2660 | Rotary Cutters | 60" | 75 hp |
| Land Pride DBM2660 | Rotary Cutters | 60" | 75 hp |
| Land Pride RCP2760 | Rotary Cutters | 60" | 75 hp |
| Land Pride RCPM2760 | Rotary Cutters | 60" | 75 hp |
| Land Pride RCP3760 | Rotary Cutters | 60" | 95 hp |
| Land Pride RCPM3760 | Rotary Cutters | 60" | 95 hp |
Checked: 3-point hitch category, PTO horsepower. Not checked: PTO speed (540/1000), hydraulic flow, 3-point lift capacity, rear remotes, ballast.
These implements meet this tractor's hitch and PTO-HP requirements — this is not a full compatibility guarantee. Confirm the remaining specs with your dealer before purchasing.
Nebraska Tests
NTTLTest #1648
July - August 1996.Nebraska Tractor Test
PTO Power
164.8HP
Drawbar
163.9HP
Hydraulics
42.3HP