Loading...

Please wait while we retrieve your information.
If this page does not load within 30 seconds, pleaserefresh the page
Please wait while we retrieve your information.
If this page does not load within 30 seconds, pleaserefresh the page
Engine:
Allis Chalmers Standard
Power:
56 HP (Engine) / HP (PTO)
Fuel Type:
Diesel
Production:
1966 - 1974
Overview | |
---|---|
Summary | x1966 - 1974 Industrial tractor |
Production | |
---|---|
Manufacturer | Allis Chalmers |
Summary | Industrial tractor / Built in Topeka, Kansas, USA |
Variants | |
---|---|
615 | industrial |
615TLB | backhoe-loader |
Mechanical | |
---|---|
Summary | Two-wheel drive |
Final drives | bull gear |
Summary | Power steering / Mechanical drum brakes / Open operator station. |
Hydraulics | |
---|---|
Type | open center |
Pressure | 2250 psi 155.1 bar |
Pump flow | 4.4 gpm (three point) 16.7 lpm |
15.5 gpm (loader) 58.7 lpm | |
24 gpm (backhoe-loader) 90.8 lpm | |
Steering flow | 4.75 gpm (gas) 18.0 lpm |
5.25 gpm (diesel) 19.9 lpm |
Tractor hitch | |
---|---|
Rear Type | I Opt Optional |
Electrical | |
---|---|
Gas Ground | positive |
Diesel Ground | negative |
Charging system | generator |
Battery volts | 12 |
References |
615 Backhoe Loader published in 1969, by Allis Chalmers |
615 Backhoe Loader (TE 308/695) published in 1969 |
615 Tractor (SV104) published in 1969 |
Engine options | |
---|---|
Summary | Allis-Chalmers 2.6L 4-cyl gasoline / Allis-Chalmers 2.9L 4-cyl diesel / Allis-Chalmers 3.3L 4-cyl diesel |
Engine Detail | |
---|---|
Summary | Allis-Chalmers / gasoline / 4-cylinder / liquid-cooled |
Displacement | 160 ci 2.6 L |
Bore/Stroke | 3.625x3.625 inches 92 x 92 mm |
Power | 56.8 hp 42.4 kW |
Compression | 8:1 |
Rated RPM | 2000 |
Torque | 154 lb-ft 208.8 Nm |
Torque RPM | 1624 |
Starter volts | 12 |
Oil capacity | 4 qts 3.8 L |
Coolant capacity | 10 qts 9.5 L |
Sparkplug | ACDelco C-45 |
Champion J-7 | |
Auto-Lite A-5 | |
Sparkplug gap | 0.023 inches 0.584 mm |
Point gap | 0.022 inches 0.559 mm |
Intake valve clearance | 0.009 inches (hot) 0.229 mm |
Exhaust valve clearance | 0.015 inches (cold) 0.381 mm |
Engine Detail | |
---|---|
Summary | Allis-Chalmers / diesel / 4-cylinder / liquid-cooled / The 175 diesel engine was used in the Allis-Chalmers 615 from the start of production until serial number 5001, likely in mid-1966. |
Displacement | 175 ci 2.9 L |
Bore/Stroke | 3.5625x4.375 inches 90 x 111 mm |
Power | 44 hp 32.8 kW |
Compression | 15.5:1 |
Rated RPM | 2000 |
Engine Detail | |
---|---|
Summary | Allis-Chalmers D2200 / diesel / 4-cylinder / liquid-cooled / The Allis-Chalmers 615 received the 200 diesel engine at serial number 5001. |
Displacement | 200 ci 3.3 L |
Bore/Stroke | 3.875x4.125 inches 98 x 105 mm |
Power | 57 hp 42.5 kW |
Compression | 16.25:1 |
Rated RPM | 2000 |
Idle RPM | 650-2200 |
Torque | 153 lb-ft 207.5 Nm |
Torque RPM | 1750 |
Firing order | 1-2-3-4 |
Starter volts | 12 |
Oil capacity | 9 qts 8.5 L |
Coolant capacity | 13.5 qts 12.8 L |
Intake valve clearance | 0.015 inches (hot) 0.381 mm |
Exhaust valve clearance | 0.015 inches (hot) 0.381 mm |
Transmission options | |
---|---|
Summary | 4-speed power shuttle / 4-speed gear |
Transmission | |
---|---|
Type | power shuttle |
Gears | 4 forward and reverse |
Clutch | wet disc (shuttle) |
dry disc (engine) |
Speeds | |
---|---|
Summary | With 14.9x24 R4 rear tires. / |
Transmission | |
---|---|
Type | gear |
Gears | 4 forward and 1 reverse |
Clutch | dry disc |
Allis Chalmers 615 Tires | |
---|---|
Ag front | 7.50x16 |
Ag rear | 16.9x24 |
Dimensions | |
---|---|
Wheelbase | 87 inches 220 cm |
Length | 126 inches 320 cm |
Gas Weight | 4400 lbs 1995 kg |
Diesel Weight | 4550 lbs 2063 kg |
Front tread | 51/54.375 inches 129/138 cm |
Rear tread | 61.875/72.125 inches 157/183 cm |
Allis Chalmers 615 Height | |
---|---|
Steering wheel | 63 inches 160 cm |
Hood | 56.875 inches 144 cm |
Exhaust | 79 inches 200 cm |
Last Database Update: 6/23/2025